Other Products and Accessories

3rd PARTY MANUFACTURER LISTING      
PRODUCT NAME MANUFACTURER DESCRIPTION REQUIRED TEMPOSONICS OUTPUT
Tempo Tester ACS Hydraulics
Tel: (541) 687-4611
Fax: (541) 687-2858
Rugged, in-line test for isolation of intermittent faults; stand alone testing option available. All Temposonics units, Pulse Width Modulated or Analog (i.e., 0 to 10 Vdc, 0 to -10 Vdc, 4 to 20 mA)
Tempo II Cable Tester ATS Automation
Tel: (604) 273-6080
Fax: (604) 273-6180
Shows status of dual power supply voltages at the probe which confirm the state of the cable Temposonics II with 10-pin threaded style connector
PD-12 CMC Sencon, Inc.
Phone: (800) MOTION9
Fax: (800) 262-2792
Displays magnet position from a single transducer, providing visual assurance of proper position Temposonics II Start/Stop or Temposonics R-Series with SSI
MTI800 CMC Sencon, Inc.
Phone: (800) MOTION9
Fax: (800) 262-2792
Multiple (up to 8) transducer programmable limit switch saves/recalls setup configurations by part number for reduced changeover time Start/Stop
MTI400 CMC Sencon, Inc.
Phone: (800) MOTION9
Fax: (800) 262-2792
Multiple (up to 4) transducer programmable limit switch; saves/recalls setup configurations by part number for reduced changeover time Start/Stop
AEC-100 CMC Sencon, Inc.
Phone: (800) MOTION9
Fax: (800) 262-2792
Self checking Absolute to Encoder Converter; converts transducer output to encoder quadrature; re-homing of machine not required; includes zero pulse Start/Stop, SSI
Mill-Rod Heavy Duty Transducer Enclosure Rotalec
Head office, Montreal
900 McCaffrey
Saint-Laurent, Quebec
Tel: (514) 341-3685
Fax: (514) 341-5205
Extremely rugged stainless steel enclosure for transducer; provides excellent physical protection in harsh environments as well as convenient mounting method All Temposonics Linear Displacement Transducers, all outputs
RPS10 Delta Computer Systems
Tel: (360) 254-8688
Fax: (360) 254-5435
Single channel RS422 interface and pulse-width modulated to start stop converter Temposonics I, Temposonics II w/DPM or RPM, and Temposonics L Series w/Start/Stop
Universal Temposonics Tester (UTI) IPS, Inc.
Tel: (270) 827-1483
Fax: (270) 830-8603
Micro-Processor based, hand held, battery operated, menu-driven tester; verifies the working condition of the sensor. All Temposonics sensors, all outputs
AC700 Temposonics Interface Card Paw-Taw-John Services, Inc.
Tel: (208) 687-1478
Fax: (208) 687-4148
E-Mail: Paw-Taw- John Services, Inc.
Provides multiple digital interfaces for Temposonics probes Pulse Width Modulated
TTU-2 Temposonics Tester Paw-Taw-John Services, Inc.
Tel: (208) 687-1478
Fax: (208) 687-4148
E-Mail: Paw-Taw- John Services, Inc.
Use to test transducer on the bench and in the field. Utilizes a menu driven LCD display/keyboard entry for easy probe test selection. Unit is AC powered. Has three connectors identified with labels on the panel and categorized as digital, analog, and SSI/485 inputs. Able to program and test the SS series (ServoSensor position controller). Cables used are standard MTS products. The unit electronics is housed in a harden ABS case with handle for easy carrying. PWM, Start/Stop, SSI, Neuter, Analog Voltage and Current, and ServoSensor position controller interface.
SAB-QS Rapid Controls Inc.
Tel: (888) 510-7688
Fax: (605) 341-5496
The SAB-QS is a two channel magnetostrictive to quadrature converter that emulates the TEC 242 functionality. It is suitable for replacement of the TEC242 in many applications. DIN rail mounted. Start/Stop, PWM, SSI
TT Transducer Tester Rapid Controls Inc.
Tel: (888) 510-7688
Fax: (605) 341-5496
Connects to +/- 15V or 24V Start/Stop, PWM, SSI, MTS CANbus, Profibus DP and analog transducers and displays position and status information from the sensor. Long term test mode catches intermittent failures. Transducer selection is accomplished via the front-panel keypad. The display is AC or battery powered, portable and housed in a rugged plastic enclosure. Analog re-transmission feature and serial interface allow logging of test outputs. All +/- 15V or +24V Temposonics Profibus DP, MTS CANbus, SSI, PWM, Start/Stop, Neuter and analog output transducers.
TDD2 Display Rapid Controls Inc.
Tel: (888) 510-7688
Fax: (605) 341-5496
The TDD2 display is a 6 digit magnetostrictive transducer display with 0.6 inch digits. One display works with multiple transducer types. Multiple magnet capabilities especially suit slitter applications. Options include a 5 channel limit switch and analog re-transmission output. Quadrature, Start/Stop, PWM, SSI, MTS Canbus.
SAB-P Parallel Transducer Interface Rapid Controls Inc.
Tel: (888) 510-7688
Fax: (605) 341-5496
The SAB-P transducer interface provides a 24 bit parallel binary or BCD interface to a host device. Scaling of the transducer data accommodates calibration requirements. Analog output is optional. Can be used to eavesdrop on sensors interrogated by other devices. Start/Stop, PWM. SSI.
SAB-S-MODBUS Rapid Controls Inc.
Tel: (888) 510-7688
Fax: (605) 341-5496
The SAB-S-MODBUS transducer interface provides a RS232 or RS485 MODBUS interface to two single or multi-magnet transducers. It supports a subset of the MODBUS protocol. DIN rail mounted. Start/Stop, PWM, SSI.
SAB-Q2 Rapid Controls Inc.
Tel: (888) 510-7688
Fax: (605) 341-5496
The SAB-Q2 is a two channel magnetostrictive to quadrature converter that provides a non burst output that is velocity proportional to the speed of travel. It supports Send All and a marker output for both channels. DIN rail mounted. Start/Stop, PWM, SSI
SAB-S-TMX Rapid Controls Inc.
Tel: (888) 510-7688
Fax: (605) 341-5496
The SAB-S-TMX transducer interface provides a serial interface to single or multi-magnet transducers. It supports a subset of the TMX-200 protocol. DIN rail mounted. Start/Stop, PWM, SSI
TDD Display Rapid Controls Inc.
Tel: (888) 510-7688
Fax: (605) 341-5496
The TDD display is a 6 digit magnetostrictive transducer display with .6 inch digits. Options include a 5 channel limit switch and analog output Start/Stop, PWM, SSI
TDD-LD Display Rapid Controls Inc.
Tel: (888) 510-7688
Fax: (605) 341-5496
The TDD-LD display is a 6 digit magnetostrictive transducer display with 2 inch digits. Options include a 5 channel limit switch and analog output Start/Stop, PWM, SSI
DPAR-1x The Rexroth Corporation
Tel: (610) 694-8300
Fax: (610) 694-8467
Single axis digital amplifier for closed loop position of analog feedback devices with force override Analog Feedback
B-3040 S.A.S. Fluid Power
Tel: (503) 256-5110
Fax: (503) 256-2546
Tempo II-J Box provides diagnostic indicators and field cable termination point for probe and valve with systems using probes containing a DPM (Digital Personality Module) Pulse Width Modulated with internal or external interrogation, or Start/Stop pulse
SB-836A S.A.S. Fluid Power
Tel: (503) 256-5110
Fax: (503) 256-2546
Recirculation J-Box. Converts neuter probe signal to pulse width modulated signal. Provides diagnostic indicators and field cable termination point for probe and valve. Neuter
DC and Magnetostrictive Transducer Interface Board Tallyrand Industrial Systems, Inc.
Tel: (619) 722-1448
Fax: (619) 966-0160
Board accepts a DC voltage input from a Temposonics and converts it to both a parallel and incremental encoder output Analog (Voltage)
Smartmount Unitrol Corporation
Tel: (248) 373-2139
Fax: (248) 373-2804
Mounting system for Temposonics sensors for cylinder or surface mounting N/A