| 3rd PARTY MANUFACTURER LISTING | |||
|---|---|---|---|
| PRODUCT NAME | MANUFACTURER | DESCRIPTION | REQUIRED TEMPOSONICS OUTPUT |
| 1771-VHSC | Allen-Bradley Tel: (216) 646-5000 Fax: (216) 646-3733 |
Single-slot, 4 channel Very High Speed Counter module; interfaces with Allen Bradley PLC-5, 2 and 3 series | Pulse Width Modulated |
| 1756-MVI | Allen-Bradley Tel: (216) 646-5000 Fax: (216) 646-3733 |
Up to 32-axis motion control with one module. This unit interfaces the Servo Sensortmto the back plane of the Control Logix PLC. Module is loaded with PTJ software that allows block transfer/ladder logic control of the controllers. (Software by Paw-Taw-John Services, Inc. (208) 687-1478). | MTS Servo Sensortm ASCII protocol |
| Series 7700 | AMCI Tel: (860) 585-1254 Fax: (860) 584-1973 |
LDT interface module to Allen-Bradley 1771 chassis; supplies linear position and velocity data | SSI, Pulse Width Modulated or Start/Stop |
| Series 7100 | AMCI Tel: (860) 585-1254 Fax: (860) 584-1973 |
LDT Interface module to SIMATIC S5-I0 Subrack; supplies linear position and velocity data | Pulse Width Modulated |
| Series 7400 | AMCI Tel: (860) 585-1254 Fax: (860) 584-1973 |
Direct Interface between Square D SY/MAX Series I/O and sensors; supplies linear position and velocity data | Pulse Width Modulated or Start/Stop |
| Series 7500 | AMCI Tel: (860) 585-1254 Fax: (860) 584-1973 |
LDT interface module to Allen-Bradley SLC 500 chassis; supplies linear position and velocity data | SSI, Pulse Width Modulated or Start/Stop |
| Series 7800 | AMCI Tel: (860) 585-1254 Fax: (860) 584-1973 |
LDT interface module to Modicon 800 Series programmable controller systems; supplies linear position and velocity data | Pulse Width Modulated or Start/Stop |
| Series 7900 | AMCI Tel: (860) 585-1254 Fax: (860) 584-1973 |
LDT interface module to GE Fanuc Series 90-70 programmable controller systems; supplies linear position and velocity data | SSI, Pulse Width Modulated or Start/Stop |
| Series 7900V | AMCI Tel: (860) 585-1254 Fax: (860) 584-1973 |
LDT interface module to VMEbus systems such as SIMATIC TI 575 programmable controllers; supplies linear position and velocity data | Pulse Width Modulated or Start/Stop |
| Series 7300 | AMCI Tel: (860) 585-1254 Fax: (860) 584-1973 |
LDT interface module for GE Fanuc Series 90-30 I/O; supplies linear position and velocity data | SSI, Pulse Width Modulated or Start/Stop |
| AVMESSI | Ansaldo Sistemi Industiali Tel: +39.010.6559690 Fax: +39.010-6559779 |
The AVMESSI is a galvanically isolated 6 channels SSI (Serial Synchronous Interface) interface card for VME bus. Every SSI channel has an online diagnostics capability ( test results, hw or sw problems ) and it is fully configurable via dip switches for: code type (binary, BCD, gray), data length (13, 21, 24 and 25 bit), communication speed ( 1 Mbit/s, 500 kbit/s, 250 kbit/s, 125 kbit/s, 62 kbit/s ), parityt bit ( none ); it has also a test mode functionality. It can refresh all 6 channels in less than 1 ms. A terminal board is available to adapt different signal levels coming from the field. | Temposonics R Series w/SSI-forwarded or reverse acting scale orientation |
| F2-CP128 | Automation Direct | Up to 5 axis motion control per module. This unit interfaces the ServoSensor™ position controller to the back plane of a 240/250 PLC platform. Up to 7 modules per backplane will give 35-axis control. (Software by Paw-Taw-John Services, Inc. (208) 687-1478 www.pawtaw.com). |